Design of Mechanisms & Machines (H7110)
Design of Mechanisms and Machines
Module H7110
Module details for 2021/22.
15 credits
FHEQ Level 6
Module Outline
The module covers the principles of design of machine components commonly used in mechanical engineering applications. The module emphasises on role of statics, stress analysis, and materials choice in the design process. The main types of mechanical components failure as well as methods of prevention or prediction of such failures are also covered. The main aims of the module are:
- To help students understand how stress and strain affect design of mechanical components
- Place mechanical design in the context of manufacturing processes
- Make students aware of failure, reliability and safety issues and the implications on costs of mechanical components
- Make students aware of how efficiency of machine components and environmental problems can be approached at the design stage.
The syllabus covers the following AHEP4 learning outcomes: C1, C2, C3, C4, C5, C6, C7, C14, C16, M1, M2, M3, M4, M5, M6, M7, M14, M16
Module learning outcomes
Demonstrate a systematic understanding of the role and functionality of various machine components. Use appropriate literature and understand the role of the choice of materials and manufacturing processes upon the strength, durability, safety, cost and environmental impact in the mechanical design process.
Apply appropriate analytical techniques in solving complex problems of mechanical design of machine components, evaluating the limitations of such techniques
Demonstrate a systematic understanding of the main types of lubrication mechanisms, of their effect on the efficiency of mechanical systems and how these can used to prevent/delay failure of machine components.
Understand the failure modes and distinguish between catastrophic and damage accumulation types of failure of machine components. Use appropriate methods to evaluate the reliability and operational life of machine components.
| Type | Timing | Weighting |
|---|---|---|
| Unseen Examination | Semester 1 Assessment | 50.00% |
| Coursework | 50.00% | |
| Coursework components. Weighted as shown below. | ||
| Project | T1 Week 4 | 25.00% |
| Project | T1 Week 6 | 25.00% |
| Project | T1 Week 9 | 25.00% |
| Project | PS2 Week 1 | 25.00% |
Timing
Submission deadlines may vary for different types of assignment/groups of students.
Weighting
Coursework components (if listed) total 100% of the overall coursework weighting value.
| Term | Method | Duration | Week pattern |
|---|---|---|---|
| Autumn Semester | Lecture | 2 hours | 11111111111 |
| Autumn Semester | Seminar | 2 hours | 01010010101 |
| Autumn Semester | Lecture | 1 hour | 11111111111 |
How to read the week pattern
The numbers indicate the weeks of the term and how many events take place each week.
Prof Romeo Glovnea
Assess convenor
/profiles/250860
Please note that the University will use all reasonable endeavours to deliver courses and modules in accordance with the descriptions set out here. However, the University keeps its courses and modules under review with the aim of enhancing quality. Some changes may therefore be made to the form or content of courses or modules shown as part of the normal process of curriculum management.
The University reserves the right to make changes to the contents or methods of delivery of, or to discontinue, merge or combine modules, if such action is reasonably considered necessary by the University. If there are not sufficient student numbers to make a module viable, the University reserves the right to cancel such a module. If the University withdraws or discontinues a module, it will use its reasonable endeavours to provide a suitable alternative module.