ÈÕº«ÎÞÂë

School of Engineering and Informatics (for staff and students)

Advanced Electronic Systems (524H1)

Advanced Electronic Systems

Module 524H1

Module details for 2025/26.

15 credits

FHEQ Level 7 (Masters)

Module Outline

The goal of the Advanced Electronic Systems module is to provide students an exposure to the fascinating world of analogue and mixed-signal signal processing. As part of the course, students will build analogue systems using analogue ICs and study their macro models, characteristics and limitations.
Module Outline
In this course students will learn:
• internal operation of analogue integrated circuits including noise
• operation of switched-capacitor circuits including comparator, filters and convertors
• Practical experiments using industry standard hardware for data acquisition
• Sample and Hold circuits
• DAC and ADC oversampling convertors
• phase-locked loop circuits
• Develop practical skills within the analogue and mixed-signal electronics laboratory work.

Module Topics
Introduction and Op-amp abstraction, feedback
Op-amp circuits
Noise in Op-amps
Negative Feedback
Positive Feedback and comparators
ADC noise
Multi-vibrators and Comparators II
Second Order Analogue Filters
Switch capacitor filters
Universal Active filters.
VCO and PLL
Charge Pumps and DC to DC converters
Advanced topics in electronics ( Memristors).

The syllabus thus addresses the AHEP4 Learning outcomes: [M1, M2, M4, M5, M6, M11, M12, M13], [C1, C2, C4, C5, C6, C11, C12, C13]

Library

Analogue Integrated Circuit Design - D Jones, K. Martin
Demystifying switch capacitor circuits - M Liu

Module learning outcomes

Apply a comprehensive knowledge of engineering principles and industry standards to design and critically analyse complex electronic circuits including VCO/ phase-locked-loop used in applications such as modulators in modern communication systems

Systemically identify and analyse the limitations on the design of complex analogue integrated circuits, using literature and mathematical principles to calculate the effects of errors and devise advanced circuit techniques to improve the overall system performance

Apply an integrated/systems approach to develop and understand advanced analogue system techniques including switch capacitor and complex filter using operational amplifiers

Learn how to develop a macromodel for an IC based on its terminal characteristics, I/O characteristics, DC transfer characteristics, frequency response, stability characteristic and sensitivity characteristic and be able to perform fault diagnosis of an electronic system including the selection of the appropriate components in a laboratory environment

TypeTimingWeighting
Unseen ExaminationSemester 1 Assessment50.00%
Coursework50.00%
Coursework components. Weighted as shown below.
ReportT1 Week 6 40.00%
ReportT1 Week 11 60.00%
Timing

Submission deadlines may vary for different types of assignment/groups of students.

Weighting

Coursework components (if listed) total 100% of the overall coursework weighting value.

TermMethodDurationWeek pattern
Autumn SemesterLecture2 hours11111111110
Autumn SemesterLaboratory2 hours01011011100
Autumn SemesterLecture1 hour00000000001

How to read the week pattern

The numbers indicate the weeks of the term and how many events take place each week.

Dr Elizabeth Rendon-Morales

Assess convenor
/profiles/345380

Please note that the University will use all reasonable endeavours to deliver courses and modules in accordance with the descriptions set out here. However, the University keeps its courses and modules under review with the aim of enhancing quality. Some changes may therefore be made to the form or content of courses or modules shown as part of the normal process of curriculum management.

The University reserves the right to make changes to the contents or methods of delivery of, or to discontinue, merge or combine modules, if such action is reasonably considered necessary by the University. If there are not sufficient student numbers to make a module viable, the University reserves the right to cancel such a module. If the University withdraws or discontinues a module, it will use its reasonable endeavours to provide a suitable alternative module.

School of Engineering and Informatics (for staff and students)

School Office:
School of Engineering and Informatics, ÈÕº«ÎÞÂë, Chichester 1 Room 002, Falmer, Brighton, BN1 9QJ
ei@sussex.ac.uk
T 01273 (67) 8195

School Office opening hours: School Office open Monday – Friday 09:00-15:00, phone lines open Monday-Friday 09:00-17:00
School Office location [PDF 1.74MB]